http://www.jeepportal.com/ Tue, 19 Aug 2008 18:37:37 -0700 MyBB http://www.jeepportal.com/showthread.php?tid=45 Wed, 06 Aug 2008 01:09:55 -0700 http://www.jeepportal.com/showthread.php?tid=45
I am located in Arizona to the east of Phoenix right off of the 60 freeway. This would best be as a local pick-up, but I would consider shipping them at your cost. These are currently up for best offer and nothing decent will be turned down so hit me up and we'll make it happen. Thanks for checking out my post! :cool:]]>
I am located in Arizona to the east of Phoenix right off of the 60 freeway. This would best be as a local pick-up, but I would consider shipping them at your cost. These are currently up for best offer and nothing decent will be turned down so hit me up and we'll make it happen. Thanks for checking out my post! :cool:]]> http://www.jeepportal.com/showthread.php?tid=44 Wed, 06 Aug 2008 01:08:41 -0700 http://www.jeepportal.com/showthread.php?tid=44
I am located in AZ to the east of Phoenix right off of the 60 freeway. These would be best as a local pick-up as they would be a PITA to pallet and would cost a bit to ship. I am currently asking $1400 for the pair and the goodies that go with them, BUT I am very open to offers so hit me up and we'll make it happen. Thanks for checking out my post!]]>
I am located in AZ to the east of Phoenix right off of the 60 freeway. These would be best as a local pick-up as they would be a PITA to pallet and would cost a bit to ship. I am currently asking $1400 for the pair and the goodies that go with them, BUT I am very open to offers so hit me up and we'll make it happen. Thanks for checking out my post!]]> http://www.jeepportal.com/showthread.php?tid=43 Wed, 06 Aug 2008 01:06:52 -0700 http://www.jeepportal.com/showthread.php?tid=43
I also have a TH400 that was rebuilt soon before I bought it and only had a few hundred miles put on it. Included with it is a deep pan. I am asking $200 for it, but am open to an offer.

Also available are an NP203 and an NP205 t-case. The 203 is complete and the PO said it worked well. The 205 is currently apart and needs a refurb kit. The main thing about these t-cases is that I bought them so that I could put together a t-case doubler using the kit from NorthWest Fab. I bought a 32 spline input shaft as an upgrade for the 205, and also bought the triple stick shifter as well. All told the NorthWest Fab stuff cost me about $1000. I am asking $1000 for the BRAND NEW/UNUSED doubler kit AND am including the two t-cases at that price, and just like my other stuff am open to an offer.

Again I want to overly and clearly emphasize that I am open to serious offers. I am also VERY open to some kind of package deal(s). So let me know whats on your mind. Thanks for checking out my post! :cool:]]>
I also have a TH400 that was rebuilt soon before I bought it and only had a few hundred miles put on it. Included with it is a deep pan. I am asking $200 for it, but am open to an offer.

Also available are an NP203 and an NP205 t-case. The 203 is complete and the PO said it worked well. The 205 is currently apart and needs a refurb kit. The main thing about these t-cases is that I bought them so that I could put together a t-case doubler using the kit from NorthWest Fab. I bought a 32 spline input shaft as an upgrade for the 205, and also bought the triple stick shifter as well. All told the NorthWest Fab stuff cost me about $1000. I am asking $1000 for the BRAND NEW/UNUSED doubler kit AND am including the two t-cases at that price, and just like my other stuff am open to an offer.

Again I want to overly and clearly emphasize that I am open to serious offers. I am also VERY open to some kind of package deal(s). So let me know whats on your mind. Thanks for checking out my post! :cool:]]> http://www.jeepportal.com/showthread.php?tid=42 Mon, 04 Aug 2008 14:31:26 -0700 http://www.jeepportal.com/showthread.php?tid=42 I have a 1997 XJ kinda new to the jeep thing. Just lifted my first XJ and built me a roof rack and put 32 11.50s on it. Many Mods in the future, hopefuly !!!!! [/font]]]> I have a 1997 XJ kinda new to the jeep thing. Just lifted my first XJ and built me a roof rack and put 32 11.50s on it. Many Mods in the future, hopefuly !!!!! [/font]]]> http://www.jeepportal.com/showthread.php?tid=41 Sun, 27 Jul 2008 08:51:14 -0700 http://www.jeepportal.com/showthread.php?tid=41 http://www.jeepportal.com/showthread.php?tid=40 Sat, 26 Jul 2008 18:18:37 -0700 http://www.jeepportal.com/showthread.php?tid=40 http://www.jeepportal.com/showthread.php?tid=39 Tue, 08 Jul 2008 10:17:03 -0700 http://www.jeepportal.com/showthread.php?tid=39
There is a spark getting to the spark plugs but not to the coil. The fuel pump is not getting fuel. When I turn on the ignition the battery light does not light up. When I try to start the engine the dash lights go out but the fuel warning light and the ABS light remain on even though there is plenty of fuel in the tank.
I have checked the battery, earth strap and fuses and all look ok.

Could the problem be a fault with the immobilser that is stopping the car from starting?
Thanks for any help.
Hugh]]>
There is a spark getting to the spark plugs but not to the coil. The fuel pump is not getting fuel. When I turn on the ignition the battery light does not light up. When I try to start the engine the dash lights go out but the fuel warning light and the ABS light remain on even though there is plenty of fuel in the tank.
I have checked the battery, earth strap and fuses and all look ok.

Could the problem be a fault with the immobilser that is stopping the car from starting?
Thanks for any help.
Hugh]]> http://www.jeepportal.com/showthread.php?tid=38 Mon, 30 Jun 2008 06:48:18 -0700 http://www.jeepportal.com/showthread.php?tid=38
Page 56]]>
Page 56]]> http://www.jeepportal.com/showthread.php?tid=37 Sat, 28 Jun 2008 08:21:27 -0700 http://www.jeepportal.com/showthread.php?tid=37
'98 4.0,242tc,3 inch lift,235x15 tires for now 31x10.50 after these wear out, tc skid,gastank skid,front hooks and brackets,hidden hitch rear]]>
'98 4.0,242tc,3 inch lift,235x15 tires for now 31x10.50 after these wear out, tc skid,gastank skid,front hooks and brackets,hidden hitch rear]]> http://www.jeepportal.com/showthread.php?tid=36 Sat, 21 Jun 2008 14:34:14 -0700 http://www.jeepportal.com/showthread.php?tid=36
]]>
]]> http://www.jeepportal.com/showthread.php?tid=35 Sat, 21 Jun 2008 14:03:01 -0700 http://www.jeepportal.com/showthread.php?tid=35 http://www.jeepportal.com/showthread.php?tid=34 Sun, 15 Jun 2008 12:40:53 -0700 http://www.jeepportal.com/showthread.php?tid=34
I'm located in El Cajon CA. Just east of San Diego.]]>
I'm located in El Cajon CA. Just east of San Diego.]]> http://www.jeepportal.com/showthread.php?tid=33 Thu, 12 Jun 2008 10:00:19 -0700 http://www.jeepportal.com/showthread.php?tid=33 http://www.jeepportal.com/showthread.php?tid=32 Mon, 09 Jun 2008 15:03:40 -0700 http://www.jeepportal.com/showthread.php?tid=32
My junk is old but it has a 3.5 RE lift with homemade front winch bumper and a homemade rear reciever bumper. It has 31x10.50x15 BFGs and they are mounted on Crager Soft 8s. It has a MileMarker winch up front. I carry a HiLift on a Surco roof rack along with a shovel and my Spare. Many tools and spare fluids and parts are in two plastic milk crates inside. Two recovery straps round out the recovery stuff. Stock axles but I do have plans to upgrade those in the future.:cool:]]>
My junk is old but it has a 3.5 RE lift with homemade front winch bumper and a homemade rear reciever bumper. It has 31x10.50x15 BFGs and they are mounted on Crager Soft 8s. It has a MileMarker winch up front. I carry a HiLift on a Surco roof rack along with a shovel and my Spare. Many tools and spare fluids and parts are in two plastic milk crates inside. Two recovery straps round out the recovery stuff. Stock axles but I do have plans to upgrade those in the future.:cool:]]> http://www.jeepportal.com/showthread.php?tid=31 Mon, 09 Jun 2008 09:35:49 -0700 http://www.jeepportal.com/showthread.php?tid=31
Let friends know and even put a link in your sig at other boards. Any help will be appreciated.]]>
Let friends know and even put a link in your sig at other boards. Any help will be appreciated.]]> http://www.jeepportal.com/showthread.php?tid=30 Mon, 09 Jun 2008 09:21:31 -0700 http://www.jeepportal.com/showthread.php?tid=30 http://www.jeepportal.com/showthread.php?tid=29 Mon, 09 Jun 2008 05:25:47 -0700 http://www.jeepportal.com/showthread.php?tid=29 http://www.jeepportal.com/showthread.php?tid=28 Sun, 08 Jun 2008 21:10:19 -0700 http://www.jeepportal.com/showthread.php?tid=28 I've been thinking about purchasing a Jeep. I figured I might as well get all the info I can before my buy. Hopefully I'll be able to soak in as much as you guys pour out! What is the best Jeep for offroading?

Eager to learn!
Orange]]> I've been thinking about purchasing a Jeep. I figured I might as well get all the info I can before my buy. Hopefully I'll be able to soak in as much as you guys pour out! What is the best Jeep for offroading?

Eager to learn!
Orange]]> http://www.jeepportal.com/showthread.php?tid=27 Sun, 08 Jun 2008 20:58:47 -0700 http://www.jeepportal.com/showthread.php?tid=27 Here is my 77 J10. It needs some TLC, but I'll be giving it plenty. It's got a 360 with 44's and a D20 t-case. First thing I did was fix his smile!:D I'll be sure to post up any progress. This one is the last on my to do list, but it will be beaten again!!!




]]> Here is my 77 J10. It needs some TLC, but I'll be giving it plenty. It's got a 360 with 44's and a D20 t-case. First thing I did was fix his smile!:D I'll be sure to post up any progress. This one is the last on my to do list, but it will be beaten again!!!




]]> http://www.jeepportal.com/showthread.php?tid=26 Sun, 08 Jun 2008 17:21:04 -0700 http://www.jeepportal.com/showthread.php?tid=26